Cards and Crafts : Flower Making Tutorial

Showing posts with label Flower Making Tutorial. Show all posts

25.1.19

Photo Holder with Easy Handmade Flowers

Mixed Media Photo Holder

Hi friends have you ever started a project intending to make one thing and ended up making something entirely different!! When I started this project I intended to just make a simple card to showcase the new Crealies Square dies .

Crealies Squares

Crealies dies are designed so cleverly that even if you mix and match different sets they coordinate perfectly. Here I used 2 Crealies die sets to create numerous layers and frames .

Mixed Media Box Base

I got so carried away while I added the original "card" to the front of a box made using this Tutorial : DIY Recipe/Photo Holder Tutorial

Mixed Media Box

The box is raised above the ground using cute metal feet.

Mixed Media Box

The sides are accordion folds dressed up with the octagonal lace design from Crealies and I added lots of beautiful lace and fabric trims to give this memory box a shabby chic and feminine feel!

Mixed Media Box

In the first photo you can see a roof on the holder and it is detachable roof . I wanted a delicate look so I made it out of acetate and lacey die-cuts made with the Crealies Decorette XL No. 02 which is also used on the sides of the photo holder

Mixed Media Box

The "memories" you see is a Crealies Text die cut and it is placed on the Crealies scroll banner die and encrusted with flower pearls .

Pearl encrusted Scroll

In the lower corner I added a square frame with pearls , pearly hearts, a brass key and a clock which are perfect for the concept of the "memory box photo holder "!

Mixed Media Box

And how can I have a post without sharing a few tips.So here is a mini Tutorial of sorts explaining how you can make a 3 dimensional lily.

Easy Flower Tutorial

I used the Crealies Uno no.51 and Set of 3 no.51 flower dies.
You can try with any other flower die cut or punched flower shape too.
Feel free to adapt this idea to whatever supplies you have!

You need only 6 petals so cut away the rest .

Dont discard the petals you cut always as you can use it to make flower buds.

Ink the center of the flower as shown and tie a bunch of stamen for the center.

Paper Flower Tutorial

Place the flower with the inked surface away from you on a perforating pad/soft mouse pad and run a metal tool/pen over the petals from outside to inside.

Paper Flower Tutorial

This will curl the petals as shown

Paper Flower Tutorial

Now turn the piece over as shown below

Paper Flower Tutorial

Apply glue to the lower center and one petal and glue the stamen bunch inside and forming a 5 petal flower as you glue one petal over the other.

Paper Flower Tutorial

I arranged the flowers in such a way that they are seen rising from a flower vase. I made the cute flower vase at home using a chocolate mould and resin! The design on the vase was made using the Crealies Decorette XL No. 02 die.

Handmade Resin Flower vase

It was so fun using not only the new Crealies Squares dies but a whole bunch of exclusive Crealies dies to make this special project and I hope you liked this idea.

Mixed Media Box

Here are the list of products:

Crealies Dies/Stansen :
Crea Nest Lies XXL no.8

Crea Nest Lies XXL no.85

Partz No.31

Uno no.51

22.12.18

Foamiran Roses and Leaves Tutorial

Foamiran Roses and Leaves

Hi friends...I love making flowers and had a gala time experimenting with the new Dress My Craft Rose Die # 2. There are a total of 14 dies in this set and it is perfect to make roses ranging in size from tiny rose buds to really huge blooms!
Let me jump right into the Tutorial

Foamiran Roses and Leaves Tutorial
You can use just 2 sizes of petals to make large foamiran roses. Die cut 5 sheets of foamiran at a time using the petal dies.This not only saves time but helps to thin the foamiran even further!

Foamiran Rose Tutorial

Die cut at least 2+3+5 [these are the petals in each layer from inside to out] =10 small petals and 5+7 [outer 2 layers of petals]= 12 larger petals. Always cut a few extra petals as foamiran is very thin and it is inevitable to tear a few petals as you work especially if you are impatient like me!

Foamiran Rose Tutorial

Use a coloring media of your choice to shade petals if you wish. For these roses I lightly shaded the upper part of the petals with Mungyo Artists Soft Oil Pastels. I shaded the small petals slightly darker.

Tip: Shading the central petals darker helps to give more depth to your flower.

Foamiran Rose Tutorial

Shape the petals into a cup shape using your fingers or a ball tool. If you want to save time you can heat your petals by touching the petals to an iron and your petals will quickly curl into a cup shape but this does tend to make your petals thicker !

Tip: Using your fingers is faster but make sure you don't have nails on your fingers as otherwise you will get nail marks on your petals!

Foamiran Rose Tutorial

Take a forceps and grasp the upper edge of your petal as shown.

Foamiran Rose Tutorial

Twist the forceps to the back as shown.

Foamiran Rose Tutorial

Heat this edge on the iron box for a few seconds

Foamiran Rose Tutorial

Remove and curl it into place using your fingers again.This is how the back of your petal will look now.

Foamiran Rose Tutorial

Do the same for the other side of your petal.

Foamiran Rose Tutorial

Sometimes as your heat the petal the cupping may smoothen out...then use your ball tool/finger again to cup the central part again.

Foamiran Rose Tutorial

Don't be frustrated if you tear a few petals in this shaping step !! Shape all your petals in this way. You will need around 10 small and 12 large petals to make your rose.

Foamiran Rose Tutorial

The easiest way to make a rose is by starting with the bud. You can use a crunched up cotton ball, aluminium foil , clay or even a paper ball as your center.

I used the pointed Styrofoam buds from Dress My Craft for my rose center...love that these come in many sizes,have a wire stem to hold and the shape is just perfect!

Foamiran Rose Tutorial

Glue 2 petals overlapping each other around the central Styrofoam bud.

Tip: the quickest glue for foamiran is hot glue but be very sparing in the amount of glue you use and only apply at the lower part of the petal...that way you wont see unsightly white blobs of glue when you make your flower!

Foamiran Rose Tutorial

For the 2nd layer use 2 to 3 petals. The easiest for beginners is to use 2 petals in the 2nd layer as trying to get in 3 petals is a tight fit ...so don't be frustrated if your rose center doesn't look as cool as you wanted it to!

Foamiran Rose Tutorial

Add 4 to 5 layers in the 3rd layer. Working in 5 petals in easier

Tip: Once you have made one or 2 flowers you will quickly understand the right amount of overlap to get that perfect petal arrangement!

Foamiran Rose Tutorial

Add the outer 2 layers in the same way...overlapping the petals as you glue.

Foamiran Roses and Leaves

If you are making a bouquet or a home decor item the under-surface of the flower will be visible...add a calyx using the calyx die in the set.

Foamiran Rose Tutorial

Scrunch up the die cut calyx to make it look more natural. Turn your rose over and apply a blob of glue on the center . Add your calyx, curling it to overlap and cover the center and stem of your rose.

Foamiran Rose Tutorial

How to make Foamiran Leaves

Foamiran Leaf Tutorial

Once again die cut 5 sheets at a time ...this helps to make the leaves thinner.

Foamiran Leaf Tutorial

You can draw,use mould or even stamp to add veins to the leaves but here is a super easy way to add lovely veins.
Place the leaves on a perforating pad [ used in parchment craft and flower making] or a thick mouse pad and run the pointed tip of the Dress My Craft golf tool on the leaves to make your veins.

Foamiran Leaf Tutorial

It is so quick to make your leaves using this method!

Tip: Hold your tool in a slanted fashion rather than vertically up...this way you will not tear through the delicate foamiran.

Foamiran Leaf Tutorial

If you are making a bouquet you need to add leaf stalks...sharing a quick tip to make your job easy and fast: Insert floral wires an inch or so into the glue bottle, twirl and remove it.

Tip : Use a quick drying tacky glue for fast and mess free results. I used Aleene's tacky glue here.

Foamiran Leaf Tutorial

Stick the wire on the under-surface of your leaf[ the surface with the less prominent vein markings]

Foamiran Leaf Tutorial

It is faster and more fun if you batch process a bunch of leaves in one go!

Foamiran Leaf Tutorial

Leave undisturbed to dry . Be patient!!

Foamiran Leaf Tutorial

And voila...your beautiful leaves are ready to go on your floral arrangement!!

Foamiran Roses and Leaves

I hope you liked this project and found the tips and techniques useful.

I apologise I could not make a video ... I am much better at writing than speaking and I really wanted to share all the steps and tips in a post so that it will be easier for you to reference back to it at leisure!!
Here are the supplies used.
Everything is from Crafters Corner
Supplies : Foamiran Sheets, Dress My Craft dies : Rose die #2 , Styrofoam Buds, Mungyo Artists Soft Oil Pastels, Floral Tape, Golf Tools, Ball Tools, Flower making wire, Aleene's tacky glue

12.8.18

Simple Foamiran Flower Tutorial

Foamiran Flowers on Patchwork Easel Card

Hi friends..happy to share some projects made with the latest release from Crealies--- gorgeous Patchwork dies! Love how you can use these dies to make beautiful backgrounds for floral arrangements.