Paper Organizer Ideas

Paper Organizer

Though I have been blogging for more than a year and am a paper crafter  till recently I didnt own many papers or card stock . Of late my paper and card stock has slowly started increasing as I discovered places to buy them from!

I was also gifted some awesome paper by Asha,Priya,Jaya and Angelin [ all blogger pals!] I treasure these more than anything and had to make a lovely storage shelf for them!

This is what I recycled to make my Paper Organizer shelf [ the package of my daughters playhouse]

Paper Organizer Tutorial

I cut it up and made it into equal sized boxes

Paper Organizer Tutorial

Stacked and stuck the boxes together and made a door from another cardboard box

Paper Organizer Tutorial

Wrapped a gift wrap  paper [ recycled- it was the wrapping of my birthday gift!] and embellished it

Paper Organizer

On the door of the paper organizer shelf I added a 3 D decoupage honeybee [ I made 3 of these to use in this project].I made the pink knob for the shelf door from a broken hair accessory!

Paper Organizer

The top of the shelf has the 3 D decoupage bee which I made slightly differently [ difficult to see here !].

Paper Organizer

Here is the closeup of the 3 D decoupage Honey bee.

3 D decoupage Honey bee

Also added a punch craft dove made using a scallop punch and a pear punch [ Click here for punch craft dove tutorial]

Paper Organizer

The pink oval frame is a foam frame

Paper Organizer

Since my first paper storage idea for the smaller papers was fun to make, I ventured to make a paper organizer for my A4 card stock too. Made it in pink and blue to match my earlier paper shelf.

Paper Organizer

For the A 4 sized paper Organizer, I recycled this old box and made it into a double partitioned Paper organizer.

Paper Organizer Tutorial

Cut the sides in a slanting fashion. This is inspired from my dear blogger friend Ujjwal who does some lovely recycling too. Thank You Ujjwal for this wonderful and useful idea.

Paper Organizer Tutorial

I added a partition  to hold paper scraps. The partition was glued on using a glue gun.

Paper Organizer Tutorial

I used blue and pink chart paper to line the cardboard paper organizer.Here is the side view showing the slanting cuts which helps to see as well as take out your papers easily

Paper Organizer

Embellished the A4 paper organizer with 3 D decoupage , butterflies, ribbons and pearls.

Paper Organizer

I layered 2 punched butterflies on each other to make this cute butterfly.

Punched Butterfly

The pink roses are handmade punch craft roses whose tutorial I have been promising for quite some time! Sorry- coming soon!

Punchcraft Handmade Rose

The white fence is -- can you guess?? Well its the packaging of apples and pears !

3 D Decoupage

Here is my collection of A 4 size corrugated paper in my new Paper organizer.Daughter helped me to arrange the papers by color!

Paper Organizer

Here are the 2 paper organizers in matching colors

Paper Organizers

I hope my post is in someway useful. Do leave me your comments
Linking to MIM

Buying the Best Paper Cutter !

         Hi friends, I am often asked for guidance on what products and tools to buy and I also love to keenly follow papercrafting tool discussions on social media and forums.
One discussion which keeps cropping up time and again is which is the best paper cutter to buy!
Way back in 2012 I shared a post on Paper Cutting Tools and though a lot of what I wrote then is still valid , 5 yrs down the lane I think it's time to revive the discussion on paper cutters.

Should you really buy a Paper cutter ?
The answer is a big YES!!!
Regardless of whether you are a card maker, scrapbooker , hobby crafter , professional crafter or just a homemaker...you should definitely get a paper-cutter!!
We all love using scissors but using a scissors to cut  perfectly straight lines does take a bit of effort and time doesn't it!!
Having a decent cutter  makes cutting paper not only super easy but quick , accurate, enjoyable and efficient!!

Which is the best paper cutter ?

Most of us like to research well before buying a new tool or product but  there are  such a huge variety of paper cutters out there  that it can get pretty confusing.

And the "Best Paper Cutter" for you will actually depend on your needs, personal preferences and budget!

That said, paper cutters range from exorbitantly expensive industrial standard ones which can cut a massive 400 papers in one go to cheap plastic ones which you are better off not buying !

One of the most popular and hot selling cutters in the paper crafting industry as of the time of writing this post is the Tonic 12 x 12 inch Guillotine Maxi Cutter
but since I want you to make your own decision not only now but also in the future when newer and newer cutters come into the market, I am discussing the important factors you should consider before buying the perfect cutter for you!!

This post is based on

• my personal experience 
• discussion with fellow crafters 
• reading tons of reviews
• watching dozens of videos on the different brands of cutters 
• and taking special note of the problems crafters had due to a certain type  or feature of a cutter

so that I can bring to you a useful and completely unbiased  post.

Here are the factors you should consider to decide which paper cutter to buy.
1. Size of the Paper Cutter

• Unless you are really really sure of it I would advise you to get a 12 x 12 inch paper cutter.

Tonic Guillotine 12 x 12 inch

This is the most useful size for us papercrafters as a lot of our pretty pattern paper comes in that size and most project measurements and tutorials work around that size range!

• Smaller cutters

The first cutter I got  [an impulse buy from my local market!]had a base platform which was only 5.5 inches wide.

Metal Cutter

Not only was this cutter a complete misfit for me for lots of reasons,  the size  per se put severe restrictions on my crafting requirements as I needed larger sizes of paper to make fancy fold cards, boxes and pretty much most projects!
But I have seen many many crafters especially cardmakers perfectly happy with a small cutter . So it all depends on your needs.
Advantages of a small cutter :  cheaper, more compact and portable 
Maybe a small sized cutter will be a good option as a 2nd cutter

• Cutter larger than 12 inches

If you have the space and need for a larger size by all means get one.Believe me you will love it!

From my small 5 inch cutter I jumped to purchase a huge 21 x 16 inch Deli guillotine .

21 x 16 inch Cutter

The huge size of this cutter helped me tremendously in cutting and recycling large cardboard boxes, cutting  chart paper for school projects and in cutting large ivory sheets which I use in card making and most 3 D projects.
Because I have this huge cutter I can buy larger sheets of paper/cardstock [which are always more economical ] and  easily cut them down to whatever size I wanted ! But yes it takes up a lot of space and you need to have a dedicated place to keep it.

2.Does the cutter have an extendable arm or does it fold away for storage

Sometimes the cutter may be able to cut papers 12 inches or more  but only by using an extendable arm . And some manufacturers  incorporate a fold in the middle of a 12 x 12 inch cutter so that it can fold away for storage or portability.

eg : Procision Rotary Trimmer folds in half .Tonic V blade trimmer and Fiskars Sure Cut Deluxe have extendable arms.


For many crafters these features may be a bonus feature as they like the compactness and portability features it gives the cutter.

But the problem with these type of features is  that either the measurements are missing in the junction of the extendable arm/ fold area or it is difficult to get accurate measurements in these areas. 
This is a crucial point  you should consider since the fold / extendable arm junction often falls around the 6 inch mark and that mark is so important to most cardmakers and album makers.
So the consensus is that if you need a 12 x 12 inch cutter go for a cutter which has a solid 12 x 12 base without folds or extendable arms.

3. Cutter Mechanism
For crafting purposes there are 2 main popular types of cutters depending on how the cutting blade works

• Cutters which have sliding blades - Rotary or V blade style
• Guillotine cutters which have long blades on levers which you bring down on your paper to get a nice cut guillotine fashion!

Cutters with Sliding blades
eg Tonic V blade trimmer , Fiskars Surecut trimmer

First of all I 'll list the pros which make these trimmers popular in crafting circles

1. Most of these trimmers are lightweight and portable
2. Fancy cutting blades may be available to give fancy edges to your paper
3. Scoring blade option may be available depending on the brand
4. It is possible to cut a slit in the middle of your paper and to even cut out a window on your paper
5. Generally cheaper compared to the branded guillotine cutters
6. Precise placement of the cutting line possible and many have markings  on the right side of the cutting blade as well as on the casing of the blade through which the blade slides.

Cons 

• most brands unless specifically mentioned as self sharpening will need to have the blades replaced- this can be rather tiresome as not only do you have to find a local source for the blades but take into consideration the cost of all those blades you will be needing!
• frayed edges are common and slight fraying can occur even with a fresh blade
• cutting capacity of the blades in most of the brands are inferior to a guillotine cutter
• cutting specialty paper such as handmade paper trickier and more likely to give frayed edges or even refuse to cut at all!
• most trimmers can cut only a single sheet of paper at a time
• most rotary trimmers  within a decent price will not cut cardboard /chipboard 

Guillotine Cutters
Nearly all the guillotine cutters I researched had fantastic reviews about their cutting ability. 

Pros

• Nice sharp clean cuts
• Easy to cut 
• Cutting is quicker than with a sliding type trimmer
• Blades are sharper compared to that of a sliding trimmer and can cut better and a  wider range of materials
• Most are self sharpening and need no blade replacing 
• Can cut multiple papers  depending on brand

Cons

• you cannot cut a slit in the middle of your paper
• guillotines don't come with scoring or fancy blade options
• you have to exercise due care when working it !

When buying a guillotine pay attention to product descriptions and reviews about these features in particular:

• Blade's  resting position

Guillotine cutters have their blades on the long handle and on the base and after cutting it is always desirable to have a cutter which can stay in the closed position without having to fiddle with difficult to manoeuvre locking mechanisms.

A locking mechanism which is too hard to lock and unlock makes it a pain so do read specific reviews about the locking mechanism if that is important to you.

As of the date of writing this post I have read a lot of negative reviews about the locking mechanism of the Martha Stewart guillotine cutter with crafters complaining how difficult it was to use.

The locking mechanism of my large 21 x 16 inch Deli malfunctioned and the cutter stays in the open position with blades exposed ! And yes it is a rather undesirable and admittedly dangerous situation !!!

Deli cutter

The Tonic 12 x 12 maxi cutter on the other hand has a perfect lever mechanism...there is no lock to fiddle with and the blades stay closed easily.

Tonic Guillotine

• Safety finger guard- can be either a transparent plastic or  rubber piece which not only holds the paper in place but also prevents you from chopping off your fingers!
  

Do read the reviews of the finger guard/paper holder as in some cutters  the space under the safety guard was too narrow and crafters found it difficult to insert paper under it easily.
My 16x 21 inch Deli cutter has a safety guard attached to the cutting lever and it swings  up each time the the cutting arm lifted and it is a bit of an irritation! [see picture above] 
Also some guillotines do not have a safety finger guard ! My 10 inch Deli does not have a safety guard and yes I agree it is unsafe and accidents can happen but the advantage is that you can better see exactly where  you are cutting!!  

4.Measurements 

• Check if the cutter has  measurements in  inches and /centimeters

Even if all your life you have been  used to working with centimeters the majority of craft tutorials are in inches and you really need a cutter which can measure inches 

• Check the smallest measurement possible

If you make albums or boxes or other 3 d projects it will be very very helpful to you to have a cutter which can measure fractions such as 1/8th of an inch and even 1/16th of an inch such the Tonic Guillotine shown below

Tonic Guillotine

One of the main disadvantages of my Deli cutter [pictured below] was that I had to eyeball measurements smaller than 1/4th of an inch and the grid line on the base was in centimeters which was quite useless to me as I usually worked in inches.

Deli Guillotine

• Position of the measuring lines

Most cutters will have measurements on the top edge but it is a big big bonus if you have a cutter that has measurements in other places such as midway and also at its lower edge and the vertical border

To get an idea about the position of the measurements, increments and the ease of reading the measurements - look at videos and zoomed pictures as these features are often not mentioned in the product description

5.Grids on the body - this is one feature which is super useful. Not only does it help you to see your paper is nicely lined up but it also helps you to quickly know the measurements. Here again it's helpful to have grids in fractions of inches rather than centimeters.

1/2 inch grid lines on Tonic Guillotine 12 x 12

6.Material the cutter base is made of. 
Metal Cutters  are heavy and bulky and many top class brands such as Dahle have cutters made of metal  and they cut soooo beautifully !
But do beware of certain metallic local cutters .My first cutter from a local brand [picture above] was metallic and though its blades are still sharp, it creaks like crazy while cutting and the cutting action also is not at all smooth. Plus it has too many faults which I wont bore you with!! 
Plastic Cutters : Here again stay away from really cheap plastic cutters...not only will they break easily but they will wobble like crazy when you cut!
Wooden Cutters: Both my Deli cutters are made of wood and I love the nice sturdy feel of these cutters! Yes having a wooden base will make your cutter heavy and it will all come down to personal preference!

7. Additional perks which may appeal to you 
Newer features are always being added as the paper crafting industry evolves and tries to woo us with newer, tempting add ons.
But beware some features may look good in writing but may not be practically all that cool!
eg a Scorer with trimmer may sound awesome but just go through some of the you tube demos and the reviews and  you will reach the conclusion that you may be better off buying a dedicated paper cutter and a dedicated scoreboard separately!!

8. Online reviews- be sure to specifically google for the negative/problem reviews! And try to watch videos to see the cutter in action before you take the plunge to buy it. If possible do talk to crafty friends, ask questions online and finally weigh the pros and cons and judge the value for money before you buy.

Now coming to one of the best cutters in the  papercrafting industry

Review of the Tonic Guillotine 12 x 12 inch maxi cutter

First of all the best thing about this cutter is its size...its base can hold and cut papers 12. 5 inches in size . And this 12.5 inch rather than a simple 12 inch is especially advantageous as many of our pattern papers have an extra 0.5 inch plain bit which we  need to discard!

It has a  body  made of good quality plastic which helps to keep it fairly lightweight despite its size .

The cutting blades  are self sharpening as there are twin blades present on the base as well as on the guillotine lever and each time you bring down the lever the blades slide against each other and not only cut the paper and but also self sharpens!
Can easily cut tiny slivers of paper with precisions up to 1/16inch widths!

Crafters who enjoy quilling and quillography can easily cut customized paper-strips using thick paper!

Measurements in inches and centimetres

Measurements are etched so they will not wear off with time.

Measurements at top of guillotine

Markings every 1/16^th inches is especially advantageous as you don’t have to eyeball it - especially important for album , box making etc

Markings present at 3 places on the base: at the very top, in the middle and in the lower part

Marking at middle and lower part have an uncluttered look making them easier to read for people who prefer that

Middle Marking

Base has grids etched on it every ½ inches and you can actually even score on these if you want to.

Marked grid lines make it easy to vertically align your paper and also to make quick measurements

No extendable arm or folding line to hinder measuring in any area!! 

Transparent plastic finger guard is present near the cutting edge .This helps you to hold your paper near the blade safely.

Tonic Guillotine

This safety guard is  made perfectly....it is secured to the base and does not lift up when you lift the guillotine blade. In one of my cutter models the safety guard lifted up and it is a bit of an irritation! Also the safety guard has enough room under it to easily slip in your papers, foam, etc

Tonic Guillotine

You can even consider the safety finger guard to function as a smudge guard as it helps you to hold the paper in place without directly touching its surface!

There is a magnetic well in the top to hold your pins and paperclips! A nice additional feature indeed!!

Magnetic Holder

The kushgrip handle is detachable  and it can be stored in a slot under the  cutter. This makes the cutter more compact for storage or if you want to travel with it.

Detachable Handle

Here is a picture of my working space to give you an idea about the size of the  Tonic Guillotine 

Tonic Guillotine Cutter and Big Shot

Cons
 The only cons I could find were

• A vertical measurement line would be a nice additional feature to measure the vertical dimensions of the paper without having to turn it.
• The orange measurement markings on the top were somewhat difficult for me to read without my spectacles...but then my eyesight is not what it used to be...cant blame the cutter for that!!

Tips on Using a Guillotine Paper Cutter

1. Always work on a stable surface - don't use your cutter on your bed or on a wobbly table - not only is it risky but you will not be able to get the required force!
2. You will get the best cutting results if you use the guillotine cutter whilst standing as then you will use the guillotine levers in the best possible way!
3. Abut your paper against the top edge to easily get perfect straight cuts 
4. Always always press down firmly on the paper using the finger guards- this not only prevents your paper from moving while you are cutting it also helps give nice clean cuts
5. Bring down the cutting lever of the guillotine in a nice fast sweep. Especially when cutting "difficult" paper such as handmade paper

Cutting Capacity

The tonic guillotine cuts a wide range of materials. I tried it with thin paper, holographic paper, thick card stock, foam, fabric paper, cardboard, and even plastic and all cut beautifully !

Here is the video demonstration of the Tonic Guillotine in action showing the range of materials it can cut and special demonstration of the dos and don'ts of using a guillotine!

I hope you liked this rather exhaustive writeup. Do share tips of your own and views!

Where to buy Paper Cutters
Here is the link to the complete range of Paper cutters at Crafters Corner 
Link to the tonic guillotine at Crafters Corner Tonic 12 x 12 Maxi Guillotine

Craft Punches - Use , Care and Repair

Before I got my Big Shot, I had a serious addiction to buying punches as you can see in this drawer packed full of punches!

Craft Punches

And I think because there are many posts on my blog dedicated to punch-craft, if you google Punch craft tutorials you will find quite a few links leading to this blog! I get a lot of mails asking for guidance on punches  so here is a back to basics post  focusing  on Craft Punches

What is a craft Punch?

I think all of us are familiar with the 2 hole punch we use to punch holes on papers to file them...well craft punches are just more sophisticated version of that.

Here are some projects made using Craft Punches:

Cascading Card with Martha Stewart Heart Border Punch

Cascading Card

and Matching Hinged Gift Box with the Martha Stewart punch around the page Vintage floral punch

Fancy Fold Pop Up Card 

Pop Up card

which folds flat like this showcasing Martha Stewart daisy border punch

 Pop Up Card 

Flower shaped baskets made using the We R Memory keepers Flower Punch Board

Flower Punch Board basket

Huge Paper Daffodils made using the Flower Punch Board

Paper Daffodil

You  Can click on these links : Punch craft flowers and Punchcraft tutorials to see more projects using Punches
Tips on Using Punches

Using Punches is so easy you dont require any special skills but here are a few tips and tricks to get the best out of your punches

Surface to Punch

• Try to keep the punch on a hard surface[ not on your bed] while punching

  

  Optimal Punching Action

• You will get the best force with the least effort if you place your punch- paper on a sturdy table and use the palm of your hands to apply pressure on the punch [ arms extended with elbows only slightly bent so that you can exert the weight of your body and not strain your hands] 
• If you have a lever punch you can hold it in your hand and punch but if at all it gives you trouble go back to punching on the floor or a table exerting pressure using your hand from above!
Paper to Use for Punches



A mistake most beginners make while using punches is assuming all papers will work with punches
The thickness and texture of the paper are important considerations for using punches 
Some punches work only with thin paper while some work better with thick paper like card-stock. 

Comparison of Punch Bunch and Martha Stewart 

Some punches will work best only with punch-craft paper. Most Punch Bunch , Jef Punches will not punch Card stock.

Punch Bunch Craft Punches on card stock- poor punching!


• If a Punch doesnt work on one type of paper try it with another thicker or thinner. Here you can see the same punches demoed above giving beautiful punched designs when I used them on thin smooth Punchcraft paper 

• 

  Punches on Punchcraft paper

  

  Martha Stewart Daisy Deep Edge Border Punch

• Martha Stewart Border , Corner, and Punch around the Page Punches work beautifully with card stock and in fact don't work so well with thin or cheap quality paper

  

  Martha Stewart Beaded ruffle border Punch

Papers to avoid with Punches

• Handmade Paper - The fibers in most handmade papers don't cut well with punches.And not only punches many dies too dont cut well with handmade paper
• Glitter Paper
• Adhesive Backed Paper- you can use them with punches but adhesive can jam your punches so it is best to avoid.
• Specialty papers like Thai paper , Metallic foil covered paper
• Corrugated Paper

  

  Papers not to be avoided in Punchcraft

• Fabric lined paper
• Ivory Card stock- even Martha Stewart Punches dont punch ivory card stock though normal card stock punches easily with Martha Stewart Punches
• Foam - to punch foam only use punches specially designed for foam otherwise your punch can jam hopelessly!

Storage of Punches

• Store your punches in a dry place not subject to lots of humidity to prevent them from rusting
• Store your punches neatly arranged in a draw or box and not in a bag--well if you are wondering what is the problem with bags or throwing all your punches together...I once damaged a particularly loved punch by putting it in a bag along with some other punches and I was dismayed to find some plastic parts of  the punch broke due to all the jiggling around it was subject to and it stopped working!
• Store your punches away from dust - I have seen many crafters from foreign countries proudly displaying their punches in the open. This is not a very good option for Indian crafters as most of us stay in places with a dust problem! Store in small / large plastic style cupboards or plastic boxes or cupboards.

  

  Craft Room Cupboards

I am lucky to have a hubby who not only tolerates but appreciates my crafting hobby and last year he designed cupboards for my craft supplies.

Punch Storage

He actually measured the height of my largest Martha Stewart Punch to design  perfect sized cupboard draws  to store my punches!

Care  of Punches and How to keep your Punches in good condition
If you are a seasoned crafter you must have read about the Aluminium foil tip to sharpen a punch ...well I had heard of it but was frankly speaking apprehensive to try kitchen aluminium foil or tin can [ suggested online!] on any of my beloved punches!
I was thrilled to try out the Punch Revitaliser Kit by EK Sucess 
The kit is quite small and handy and has

1. several sheets of Wax paper 
2. Aluminum foil sheets
3. A silicone Lubricant

How to sharpen your punches?
Just like we can sharpen our kitchen knifes when they blunt with use we can sharpen our favorite punches too.

I tried out the Aluminium foil sheets in the EK Sucess Punch revitalizer kit and I dont know if I am biased but I think after I punched the aluminium sheets with the punch and then tried it on paper it did create a more sharp edge to  the punch out. 

Sharpen Punch with Foil

My only gripe is that the Aluminium foil sheets are actually not very large so you need to be rather nimble in holding it while punching through the sheet.
How to smoothen the  action of a Punch?
Now the wax paper in the kit was something I loved and did notice a marked difference in action of the punch.

Punch wax paper

I am demoing the wax paper with a Punch Bunch punch. [My MS punches all punch smoothly as long as I use quality paper with them!].

This particularly old leaf punch of mine has been vigorously used and doesnt punch smoothly.

Punch wax paper

I punched a single sheet of wax paper several times with it and I was pleasantly surprised to notice a marked difference in the ease and smoothness of the punching action!

Smoother punching action

You can also apply a few drops of the lubricant on the under-surface of the punch and let it rest for some time [ works in the same mechanism as oiling metal  parts of machinery!]

Lubrication of Craft Punch

Special tip from Shalini [owner of Crafters Corner] on solving Punch Problems : Humidity can play spoilsport while using punches. If you have any difficulty in punching a paper you could previously punch the fault may not be with your punch but the paper which had become damp while stored in our climate. You can iron / air dry the paper and try again!

What to do if you jam up a punch ?

Anyone who has used punches for some time would have had a jammed punch at some time or the other.

Why does a punch jam?

• A punch will jam if you dont exert enough pressure while punching and the partially punched paper catches in the punch mechanism [ hence the importance of using the punch on a hard, even surface and exerting adequate pressure with your palms!]
• It will also jam if you try to punch through a thickness of paper too thick for the punch [ best solution to this is prevention!]
• Trying to punch certain types of paper like handmade paper , adhesive paper and other papers listed above can jam up your punch
• It may have more tendency to jam if it has not been used for some time [ punch parts are metal and just like any other machinery which has not been used for some time a punch needs a bit of lubrication to spruce it back to life!]
• Ironically if you use a particular punch continuously too it has a tendency to jam [ solution to this is a bit of lubrication in between  batches of extensive punching projects!]

How to release a jammed punch?

If your punch jams up and the top punching mechanism does not bounce back to its normal position here are a few things to try

• Place the punch on a table/ floor and try punching through the jammed paper exerting enough pressure through your palms with arms extended at the elbows [ so that your body weight exerts its force too]- you can try this several times
• Give a gentle bang on the side of the punch - please exert due caution and dont be too rough and do try this as one of your last resorts only! I have actually had success in releasing a few naughty punches using the good old hit!

  

  Hit Punch on side

• Use a pencil with eraser on top / any rounded thin but strong object to push back the plunger of the punch back up from the under surface of the punch.

  

  Blunt object to Push plunger from beneath

  If you have room on the under-surface of your punch this will be quite easy!
  

  

  Blunt object to Push plunger from beneath

  Be especially careful about your fingers while doing this as punch metal parts are sharp and you can cut your fingers!

  

  Under-surface of Martha Stewart Punch

  Choose an object which is not too big but can give you enough force to push up the plunger part of the punch. If your punch is a delicate one like the snowflake design shown above this technique is not going to be difficult!

  

  Jef Snowflake Punch

• Try prising the jammed paper bits using a forceps /fingers /anything else !
• I read on the net many crafters advising to put the jammed punch in the freezer to contract the metal and help release the jam but I think this is best kept as a last resort as the freezer is a damp area and the metal mechanism of your punch can rust if you subject it to such a moist environment!
• If nothing else works and you lose all hope try opening it up - but a word of caution the spring mechanism inside many punches are dicey and tricky to reassemble and some punches are not easy to open up!
• Some punches have screws to help open them up while others look impossible to open without hammering them apart!

Now summing up - How to keep your Punches in good condition

• Dont punch thick/specialty papers with it
• Lubricate it to keep it punching smoothly
• If you are going to carry around your punches, take care that they dont bang around and damage each other![pack well]

Martha Stewart Daisy border Rosettes

  If you have a good quality punch it will be so easy to quickly make some "wow" projects such as these huge paper rosettes .      

Frozen theme Party with Huge Paper Rosettes

I used the MS Daisy fan deep edge border punch to make the paper rosettes as part of the party decorations for my daughter's Frozen themed birthday celebration recently.